Detcon Model
Series 700 Gas Detection Sensors
|
| |
"Environmentally Bulletproof"
• Water-Proof
• Corrosion-Proof
• Vibration-Proof
• Multi-Layer Surge Protection
• Pre-emptive Fault Diagnostics |
|
|
Detcon
Model Series 700 industrial gas detection sensors are a new generation
of intelligent sensor modules that incorporate and
integrate several leading edge improvements. The sensors
are specifically designed for harsh and extreme locations.
This new and superior level of environmental durability
in sensor design includes an electropolished 316 stainless
steel housing, multi-layered transient spike protection
circuitry and 100% encapsulated electronics. The sensor
electronics are completely protected and immune to
water ingress and corrosion. The gas detector sensor
elements are all plug-in components and can easily
be replaced in the field. Operator interface is non-intrusive
via a small handheld magnet. Configuration and routine
calibration is intuitive and menu driven with fully
scripted instructions. Sensor status is displayed on
a built-in alphanumeric LED display. Model Series 700
intelligent sensor modules feature dual redundant outputs,
a linear 4-20 milliamp analog signal and a Modbus RS-485
serial output.
Electrical Classification (FP, TP, IR Series)
Class I, Div 1, Groups B, C, D; Class I, Zone 1, Group
IIB+H2 (ATEX)
Electrical Classification (DM, O2, PI Series)
Class I, Div 1, Groups A, B, C, D; Class I, Zone 1,
Group IIC (ATEX)
Safety Approvals
CSA/NRTL (US OSHA Certified)
ATEX
SIL2
Integration Solutions Include:
• Remote Control/Alarm Relay
Module
• Hart Module
• Profibus Module
• Foundation Fieldbus Module
• Wireless Interface Module
|
| |
Detcon MicroSafe™ Gas
Detection Sensors
|
| |
"Intuitive
Diagnostic Intelligence"
• Intuitive Non-intrusive Operator Interface
• Modular Plug & Play Sensors & Transmitters
• Simple Menu-driven Calibration & Programming
• Integral Sensor Fault Diagnostics
Two Models to Choose From
• Model 500: 4-20mA
• Model 600: 4-20mA, Modbus RTU, Alarm Relays |
|
|
Detcon
MicroSafe™ Series intelligent
gas detection sensors feature Detcon's MicroSafe™ intuitive
software. Operator interface is non-intrusive using
a hand-held magnet and program switches accessed through
a glass lens cover. Calibration instructions appear
in simple interactive and sequential script on a 16-character
backlit alphanumeric display. The transmitter design
incorporates extensive fault diagnostics with each
condition conveniently identified on the transmitter
display. The gas detector sensor elements and transmitters
are plug-in components and can easily be replaced in
the field.
Model Series
500 comes standard with a linear 4-20
mA output, one-man remote calibration, self-adjusting
zero and span, and LED indicators for fault and calibration
status.
Model Series
600 includes the same features as the
500 with the addition of 3 alarm relays and an RS-485
serial communications port.
Electrical Classification - Explosion proof
Class I, Div 1, Groups B, C, D
Safety Approvals
cCSAus/NRTL (US OSHA Certified)
ATEX (TP Series Solid State H2S only) |
| |
Detcon Model 100 Gas
Detection Sensors
|
| |
"Simple, Affordable, Durable"
• 2-Wire Loop Powered
• Wide Range of Toxic Sensors + Oxygen
• XP-Intrinsically Safe design
• Non-Intrusive Interface
• 4-20 Milliamp Output
• Class I, Division 1, Groups B,C,D
• Integral Sensor Fault Diagnostics
• Fully encapsulated electronics |
|
|
Detcon
Model 100 Series sensors feature
intelligent electronics, non-intrusive operator interface
and comprehensive fault diagnostics. The sensor is
packaged in an electro-polished 316 stainless steel
housing fitted with a ¾ inch NPT thread. The
plug-in, field replaceable sensor features large surface
area gold-plated pins that reduce the effects of corrosion
in harsh industrial environments. Signal conditioning
electronics are completely encapsulated in the sensor
housing adding a high level of durability to the design.
The packaging is Explosion Proof (Class I, Div. 1 Groups
B, C, D). Model 100 is equiped with a standard analog
4-20 mA current signal equivalent to the sensor range
of detection. Upper enclosure options are aluminum
and stainless steel (includes a transient protection
terminal board). Additional accessories include wireless
communications, a loop powered digital display, Remote
Alarm Module (RAM), HART, and a current to RS-485 converter.
The standard serial converter is Modbus RTU. Each sensor
is shipped with a splash guard with integral calibration
port.
Model DM-100 provides a wide range of toxic gas sensors
and oxygen that uses electrochemical technology.
Electrical Classification
NEMA 4X Class 1, Div. 1, Groups B, C, & D
Safety Approvals
cCSAus/NRTL (US OSHA Certified)
ATEX
CE Marking |
| |
MultiFlame Flame Detectors
|
• Continuous auto-check of optical
lens
• Selectable sensitivity and time delays
• Wireless detector configuration and testing using
TLU
• HART® output option available
Two Models to Choose From
• DF-TV7-T: Multi-spectrum IR Flame Detector (3
wavelengths)
• DF-TV7-V: Multi-spectrum UV/2IR Flame Detector
(UV + dual IR) |
|
The MultiFlame
DF-TV7-T is a multi-spectrum infrared
flame detector using three wavelengths to respond to
hydrocarbon fires and is the right choice for operation
in dirty environments or for detection of smoky fires.The
MultiFlame DF-TV7-V is a combined ultraviolet/infrared
flame detector offering excellent long range detection.
Both maintain outstanding false alarm immunity, are
suitable for use in SIL2 applications and are configurable
using a hazardous area approved wireless hand held
terminal (TLU).
Electrical Classification
II 2 G Ex d II C T6 Gb (-40°C to +65°C)
Safety Approvals
SIL (pending)
ATEX
CE Marking (pending)
|
| |
GD10L Open Path Infrared
Hydrocarbon Detector
|
| |
15 Year IR Sources Warranty
• Enhanced coverage requires fewer devices
• Ultra stable & long life solid state IR
sources
• Heated retro reflector minimises icing and condensation
• Path lengths from 6.5 to 100 feet |
|
|
The
GD10L provides an effective response
to the detection of gas hazards in a wide range of
industrial environments from boiler plant rooms to
offshore petrochemical installations.
Electrical Classification
ATEX 2 II G EExde IIC T6 (-40°C to +65°C)
Safety Approvals
ATEX |
| |
GD1
Laser Open Path H2S Gas Detector
|
| |
Fastest Possible Speed of Response
• No sensor recalibration or replacement
• Superior detector stability and specificity
• Suitable for use in SIL 2 systems |
|
|
The GD1 sets a new standard for toxic gas detection.
Using a tuneable laser diode the GD1 delivers enhanced
coverage and fail safe detection. The performance improvement
marks a genuine step change for safety systems and
life cycle cost savings. At the heart of the detector
is a tuneable laser diode that eliminates environmental
effects from sun, rain and fog. The laser scans single
absorption lines where there is no interference from
other gases. Unlike traditional methods for detecting
H2S (MOS or EC cell) the GD1 needs no recalibration
and can replace multiple standard detectors to cover
the same risk.
Electrical Classification
Ex II 2 G Ex e IIC T4/T5/T6
Safety Approvals
ATEX
SIL
|
| |
DG10
Series IR Point
Gas Detectors
|
| |
For Combustible Gas and Carbon Dioxide
• Fast Reliable Response
• No Field Recalibration
• Solid State IR-Source |
|
|
The DG10 Series uses state of the art IR gas measurement
to give a fast, reliable response. The GD10P has set
the standard for gas detection in the areas of safety,
stability and low maintence. The GD10 differs from
all other point infrared gas detectors, because it
utilises silicon based solid-state sources. The complete
optomechanical design and constructions is so stable
that an ultra fast speed of response can be achieved
whilst providing unparalleled service life and detector
stability, thus saving on maintenance and service costs.
The GD10 offers the longest combined detector and IR
source warranty on the market. And is supplied with
worldwide hazardous area approvals. Suitable for use
in SIL 2 systems. An industry standard HART interface
is used for configuration of special fault levels as
well as access to extended maintenance data.
Electrical Classification
EExd IIC T6
Safety Approvals
ATEX
CSA
INMETRO
ABS
SIL
|
|
DG
Series Gas Detectors
|
| |
Backlit Display
• Flexible Configuration
• Reduced Maintenance
• Local Display
|
|
|
The DG Series gas detectors are constructed from a
common housing and consist of the MultiTox Electrochemical
for toxic gases, the MultiXplo Catalytic for flammable
gases and the MultiTox Solid State MOS for hydrogen
sulfide.The intelligent, microprocessor driven unit
is fully configurable using a wireless handheld terminal
(TLU) or optionally via HART giving true flexibility
to the installer. Parameters such as relay operation
and alarm levels are all set via the TLU, hazardous
area approved handheld unit.
Electrical Classification
II 2 G Ex d IIC T6 Gb (-40°C to +65°C)
Safety Approvals
ATEX
SIL
|
